Tel: + 86 152 0161 9036

E-mail: [email zaštićen]

EN
Sve kategorije

Zupčanica

Početna>Proizvod>vratilo>Zupčanica

Zupčasto vratilo velike čvrstoće / pogonsko vratilo od legiranog čelika u prijenosnom sistemu za teške uslove rada Dostupna prilagođena duga dužina

Mjesto podrijetla:

Provincija Jiangsu, Kina

Marka:

JIANGSU WENAN HEAVY INDUSTRY CO., LTD.

Broj modela:

G-7

  • Opis
  • Specifikacije
  • Aplikacije
  • Konkurentska prednost
  • istraga
Opis

Brza detalja:
1. Gear axle/ pinion shaft / pinion axle / drive shaft / drive axle

2. Used in transmission system like speed reducer, gearbox, and drive shaft in automobile, tractor, etc.

3. Dostupno: promjer <= 1 metar, dužina <= 10 metara

Minimalna količina narudžbe:

1

Cijena:

Ovisno o specifikacijama

Pakovanje Detalji:

otporan na ogrebotine, hrđu, na vlagu ili prema zahtjevu

Vrijeme dostave:

Zavisi od zemlje odredišta

Supply Sposobnost:

u izobilju

A gear shaft refers to a mechanical part that supports a rotating part and rotates with it to transmit motion, torque or bending moment. It is generally in the shape of a metal round rod and each section can have different diameters. The rotating parts of the machine are mounted on the shaft. The gear shaft is mainly composed of shaft groove, shaft shoulder, gear and ring groove. It is one of the core components of rotating machinery and equipment. Because of its high efficiency, low friction, low resistance, simple and convenient equipment, it is widely used in large, medium and small machinery. Gears of gear shafts include spur gears, helical gears, and herringbone gears.

Specifikacije

materijal

Legirani čelik visoke čvrstoće, npr. 18Cr2Ni4W, 20Cr2Ni4A, 17CrNiMo6, 18CrNiMo7-6, 20CrMnTi, 40CrNiMo, 30CrMnSi, 27SiMn, 35CrMo, 42CrMo, 40Cr itd.

Modul (mm)

0.5 ~ 20

Broj zuba

17 ~ 50

Promjer koraka (mm)

8.5 ~ 1000

Ukupna dužina (m)

<= 10

Tooth Finish

Standard, visoke preciznosti

Tip zuba

Straight teeth, helical teeth, Herringbone teeth

Dozvoljeni obrtni moment (Nm)

0 ~ 1000

Aplikacije

Regarding to design, uses of gear shafts generally include following situations:

- A gear shaft is generally a pinion (a gear with a small number of teeth);

- A gear shaft is generally in the high-speed end (the low-torque end);

- A gear shaft is rarely used as sliding gears for variable speeds because it is in the high-speed end, not suitable for sliding shifting;

- The length of a shaft should be shortened as much as possible. Otherwise, the shaft needs to be thickened and mechanical strength (such as rigidity, deflection, bending resistance, etc.) needs to be increased.

Konkurentska prednost

- capability of customization of gear shaft from drawings, 3D models, or simple part.

- capability of non-standard gear shaft manufacturing.

- capability of custom gear design and manufacturing.

- integritet proizvodnog procesa, uključujući odabir materijala, kovanje, finu obradu, brušenje, toplinsku obradu i površinsku obradu itd.

istraga